Z Purlin Roll Forming Machine

Roll Forming Machine Working Flow: Decoiling the Sheet>Sheet Guiding >Coil Strip Leveling>Roll Forming>Punching for Horizontal Hole>Punching for Vertical Hole >Measure Length > Cutting the profile>outlet table Technical Specifications of C / Z Purlin Roll Forming Machine un-coiler: 1)Electrical un-coiler, shrink by hydraulic station; a separate hydraulic station 2) Single head; with a press arm to keep the coil tight. 3) Max. Capacity: 3000kg; 4) Coil inner-diameter: 508mm Leveling Device/punching device: It used for making the material flat before feeding into the roll forming machine. Punch the holes on the profile. Roll-Forming M/C: 1) 13 formingsteps and 7 auxiliary steps to form; 2) Material of Roller: GCr 15; 3) It can make all the size of profile in the table through changing the position of the rollers. 4) Voltage: 380V/50Hz 5) Forming speed: 0-10m/min Hydraulic Cutting: 1) Stop to cut ,Post cut Cutting tool material:Cr12, 2) Tolerance of the cutting length: 4mm 3) It has four cutting mould with the line. 4) If the customer wants more cutting moulds, he should pay for the extra mouldsPLC Control System: 1) Using Mitsubishi PLC to control the quantity, length automatically, LCD screen; 2) Option Hydraulic un-coiler 3) Hydraulic system to expand coil inner hole; 4) Frequency Inverter to regulate turning speed, 5) Automatic stop device; 6) Load capacity = Max.3Tons; Line Speed: 20m/min Hydraulic Motor Power: 30KW Material: 1)Suitable Coil Thickness: 2.0-3.0 mm 2)Suitable Raw Materials: Q235 A